install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
7.17.3
7.17.3 Streamer Control Settings
1.
In BPswitcher go to the
Setup
menu and select
System
Settings…,
as shown on the
right.
2.
In the System Settings window,
select the
Devices
tab.
3.
In the list of enabled devices
select
ViewCast Streamer
it will
highlight orange
and select the
Settings…
button.
The ViewCast Encoder settings
window will appear as shown on
the right.
4.
Enter
the IP Address of the
ViewCast streamer in the text
field, the . (periods) are
necessary, as shown on the right.
5.
Click on the
Enter
button to save
the changes.
If the IP address is invalid a pop-
up warning will appear asking to
re-enter a valid address.
6.
Click on the
OK
button in the
System Settings window to close
it.