install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
7.11.1 Recalling Preset Camera Positions
Preset Positions are designed to be recalled rapidly. When using Telemetrics
Studio Software, sequences stored in the CTS-ST-S may be triggered by the
Broadcast Pix at the stored recall speed.
To recall a preset position:
1.
Select the desired camera from the list available on the top level PixPad
for camera control as shown on the lower left, such as Camera 1. The
Preset Positions PixPad for the selected camera will appear, as shown
on the lower right.
2.
If you want to recall one of the first 9 positions for this camera, press the
desired preset position PixButton and that preset will be loaded, the camera
will move to it, and the large display will show that preset position number as
shown below.
7.11.1