install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
4.0.2 ME 1 Tally
As described in the previous section, the Program tally output can be sent to the
optional external tally box. By default ME 2 (the main program) is sent to the tally box.
When sources from ME 1 are re-entered into ME 2 they too are tallied to the external
box as well as triggered by Audio-Follow-Video, as described in section 7.14.
In some installations ME 1 and ME 2 are used to control two different outputs
simultaneously, in this case tally for both MEs is important.
To tally ME 1 to the external tally box:
1.
In BPswitcher select the
Setup
drop down menu from the Menu button.
2.
Then select
System Settings
, as shown
on the right.
3.
In the System Settings window, select the
2ME
tab
,
as shown to the right.
4.
Place a check mark next to,
Tally ME1.
Now tally from both ME 1 and ME 2
Program rows are being sent to the
external tally box.
5.
To tally only ME 2 Program,
repeat steps 1 through 3, ensuring
that no check mark is present.
6.
Click on
OK
to save and exit the System
Settings window.
4.0.2