install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
1.5.8
10.
Under the red Router outputs section, select
which inputs you wish to route to each Aux
output, under the
Route to Input column.
Select the drop down menu and select which
input you wish to route.
These settings will be saved as the default
startup state, each time a show is loaded.
For more information about Aux control see
section 4.10.
Note:
The last 8 outputs will always be grayed
out, since they connect to the Slate cards in
the workstation.
11.
When all the Router Assignments are
configured, select the
OK
button to save and
exit the Router Assignments window.