Broadcast Pix Slate 5008G Скачать руководство пользователя страница 262

Страница: 262 / 406

install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix

Broadcast Pix

V8.5

5.9.7

To Configure Dates:

Click on the

Data Menu

and a drop down

menu will appear, as shown on the right.

Select the

Dates

option and the Data Panel

will change to view the Dates properties.

Click on the

Date1

radio button, as shown on

the right.

Up to 3 different dates may be configured and

linked to files.

To change the display format, click on the

Format

drop down menu. A list of available

display formats will appear, as shown on the
right.

Select

the desired format. The Date1

display will update showing the new format.

In addition, each date may be configured with

different separators, based off the selected
format. Click the

Separator

drop down menu

and select the desired separator. The Date1
display will update showing the new separator.

To configure Date2 and/or Date3 repeat steps

3 - 5.

Содержание Slate 5008G























































































































































































































































































































































































































Результаты поиска

Содержание Slate 5008G

Отзывы:

Broadcast Pix Slate 5008G, Руководство оператора, Страница: 262 / 406

Результаты поиска

Содержание Slate 5008G

Отзывы: