install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
2.5 Multi-View
The default 2ME Multi-View supports 3 sizes of computer (VGA/DVI) monitors in a
widescreen resolution: 1440x900, 1680x1050 and 1920x1080. The system automatically
will open the correct layout based off the primary monitor set in Windows, see section
2.6.1 to change the desktop screen resolution. These default layouts are designed for
one screen, but may be used as a starting point to create other custom layouts in a
multiple screen installation, see section 2.5.7 to create custom layouts.
The Multi-View consists of source windows, larger preview and program monitors, a
PixPad of thumbnails to correspond to the control panel PixPad, keyer windows, a status
bar, a clock/timer, clip counters as well as tally information.
The Multi-View is also interactive, so you can switch a show from the Multi-View, as a
complement to using a panel, in place of for simple shows or for backup in case the
control panel loses communication. Any switching on the Multi-View corresponds to ME 2
of the control panel.
To load the default layout:
1.
Click on the Menu button and select the
Multi-View
drop down menu.
2.
Select
Multi-View Layouts.
3.
In the following menu, select
Default Layout
as shown below.
The Multi-View will refresh and load the correct layout based off the desktop
resolution of the primary monitor.
4.
To load the default layout at application startup, hold the
Shift
button on the
keyboard when the application is being launched.
2.5