install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
1.10.1 Changing the Startup Show
When the system ships from the factory it is not set to load any show. You can turn on
auto-loading, or after you create more shows, you can change the system to auto-load a
different show. If you turn off auto-loading, then Broadcast Pix Switcher will still open,
but you need to then Load Show as described above.
To change which show auto-loads:
1.10
In BPswitcher, click on
File
and a drop down menu will
appear, then select
Load Show…,
and a window will
appear with the various saved shows. Select the
desired show and click on
Open,
as described in
section 1.6.
1.9 Changing What Show is Running
1.
In BPswitcher, click on
Setup
and a
drop down window will appear, then
select
System Settings…
as shown
on the right.
The System Settings window will
appear, as shown below.
2.
In the Startup Tab, place a check next
the to
Load show at startup,
as show
on the right.
3.
Select the show you want to auto-load,
by clicking on the drop down menu and
selecting your desired Show id the
drop down list.
4.
Click
OK
in the System Settings
window.
To have no show auto-load on startup:
1.
Uncheck the box labeled
Load show
at startup
in the System Settings
window.
2.
Click
OK.
1.10 Settings