install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
6.
For example, if you want to save all three keyer set-ups, and the sources as well
on keys 1 and 3, then press the
[Mem Save Key 1]
PixButton twice, the
[Mem
Save Key 2]
PixButton once, and the
[Mem Save Key 3]
PixButton twice, and
the following will appear in the display:
7.
Continue selecting any other elements of the panel you would like to save in this
Mem:
[Mem Save Key 4]
PixButton will save the Key 4 keyer set-ups, press again to
save a specific source, press once more to save the content. (4k, 4s or 4c)
[Mem Save Key 5]
PixButton will save the Key 5 keyer set-ups, press again to
save a specific source, press once more to save the content. (5k, 5s or 5c)
[Mem Save Key 6]
PixButton will save the Key 6 keyer set-ups, press again to
save a specific source, press once more to save the content. (6k, 6s or 6c)
[Mem Save Prev]
PixButton will save the cross point preview source, press
again to save the content. (Pv or Pvc)
[Mem Save Prog]
PixButton will save the cross point program source, press
again to save the content. (Pg or Pgc)
[Mem Save Trans]
PixButton will save the transition selected, as well as any
modifiers including softness, aspect and rate. If you press it again it will also
save the state of the [Bgr] and key transition buttons. (T or T+)
[Mem Sav More]
PixButton enables saving the state of the direct key buttons
1-6, ME 1 functions, state of the auxiliary outputs and the iBoB DSK state. It
does this individually by bringing up a secondary PixPad that lets you select the
each option. When finished press the
[Up Arrow]
to return to the main element
selection PixPad. (see next page)
4.12.1
NOTE:
When you save a source in addition to a set-up (such as for a key, prev, prog or aux), the Mem
will remember the source location, such as the sixth source of the 18 available. If you reassign
sources in another show, and source 6 is something else, then care should be taken, as this mem will
still recall whatever is in source 6. The same applies for internal content CGs, Clips, Stills and Logos.