install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
4.11.6
2. Click on the
Comm Settings…
menu on the top of the window, and the
Communications Settings window will appear, as shown below.
3. In the Default Connection section, click on the
TCP/IP
radial button.
4. In the Host IP Search Order section, enter the IP address of
192.168.53.150.
5. Click on
Add
on the right side of the window. If other IP addresses are listed,
select them and click on
Remove.
6. Click on
OK
, to save and exit the Communications Settings window.
7.
On the main Router Mapper window, click on
Discovery,
to locate the
connected panel. It is important to have the Router and Remote Aux Panel
plugged in and wired, as described in the installation section of this manual.
8. The Searching for Downloadable Devices window will appear and close
automatically once all the hardware has been found. Once completed the Device
Discovery window will appear listing the newly found hardware, as shown below.
Place a check next to
Panel 0
.
9.
Click on the
Add Newly Discovered
button at the bottom of the screen.