install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
4.13.4
3.
Select the desired Command Group radio
button, either
Macro Utilities, Switcher,
Content
or
DVEs/Keys.
For example to change the Program Row
source, select Switcher.
4.
In the Action List section of the Detail Panel,
select the desired
command
, as shown on
the right.
5.
To apply the command to the Action List, click
on
Accept
in the Detail Panel.
The Detail Panel will revert to the editing
screen, select the desired command as
described in the previous section.
To insert a new recording:
1.
Select
a step in the Action List, with the mouse. The row will
highlight white.
2.
Click on
Insert Record
or
Insert Steps
in the Control Bar,
as shown on the right.
Similar to the Record button, the Insert Record will remember
every button/command selected and it’s timing, but will start
recording above the selected step.
Similar to the Record Steps button, Insert Steps will remember a
group of commands all in 0 (zero) frames, similar to a SnapShot
memory. When using Insert Steps the recording will start above
the selected step, and the option Add Pause will be available to
insert an indefinite pause, which can be modified later.
Note when inserting in the middle of a macro, the bottom of the
macro will be hidden and display “<Inserting into macro>”. After
the recording is stopped, the rest of the steps will appear in the
Action List.
3.
When recording is finished, click on
Stop Record
in
the Control Bar.
4.
The macro is now ready to be edited, as described
in the previous section.