install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
3.8 Tally Remapping
In some larger installations, where multiple signals from many different sources are
feeding into the Broadcast Pix router, the tally outputs may need to be reassigned to
accommodated other equipment upstream/downstream of the Broadcast Pix system.
For example, a large ‘house’ router may feed not only the Broadcast Pix system but as
well as other studio equipment, where source locations can easily be varied. The
remapping of tally outputs allows for each source to be appropriately paired with its tally
signal from Broadcast Pix. The remap tally feature is only available when the optional
external tally box is installed, as described in section 1.2.3 and 1.5.6. Since this is an
advanced feature in large installations, it is advised to contact Technical Support
regarding any questions.
To Remap Tally Outputs:
1.
Open PixMaster to its first editable screen,
Select a device to edit
, as shown
below:
2.
Select the
Remap Tallies
button, and the remap tallies window
will appear, as shown on the right:
The Input # column corresponds the source signal coming
into the Router/Slate card and the the Tally # column
corresponds to the tally output on the external tally box.
The default tally mapping is 1 to 1.
3.
For
the desired input # to be remapped,
select
the corresponding
tally # drop down menu and
select
the desired tally # output
1-34.
4.
When mapping is complete, click on
OK
to save the mapping.
5.
Click on
Save show
to apply your show settings.
3.8