ZETRON 4010, Programming Manual

Page: 32 / 117

Section 3. Tutorial
3-14 025-9229C.1
Select [Q] Read Write drIve New Edit List Upload Program Quit ?Help
ZETRON MODEL 4010 CONSOLE PROGRAMMING SYSTEM
Select file name to save configuration file
to. Default name is listed first.
< NAME >
Figure 3-18. Save Configuration File Windows
Notice the current system name is the first file listed. Press ENTER to accept the default file
name. If you don’t want to accept the default name, just type over the displayed name and
press
ENTER
.
After you have accepted a new file name, the CREATE FILE menu,
X
Figure 3-19
X
, is
displayed.
Select [Q] Read Write drIve New Edit List Upload Program Quit ?Help
ZETRON MODEL 4010 CONSOLE PROGRAMMING SYSTEM
Select file name to save configuration file
to. Default name is listed first.
< NAME >
This file does not exist. Create new
configuration file? [Y] Yes No
Figure 3-19. CREATE FILE Menu
Press the Y key or press ENTER to create a new file and save the new configuration to it. If
you made a mistake typing the file name and do not wish to create a new configuration file
using that name, press
N
or
ESC
to return to the save configuration file windows.
After pressing Y , the configuration file is saved to the disk, and the program exits.