Appendix D. CPS Menu Structure
025-9229C.1
D-35
T8R8
This is an eight frequency, tone controlled, remote radio. Refer to Appendix A or B
for the tones required to control this type radio.
b) Tone Control Custom
Use this channel type for a tone controlled radio that does not use standard tones. A tone
must be specified for each function at the time each key is assigned to this type channel using
the Key edit/define menus.
4) Local (E&M) Control
A local control radio has only PTT and audio connections; it does not have control functions.
5) Delete Channel
A channel should be deleted if the channel card is to be removed from the console or if the
particular channel is inoperative. This will prevent the system from reporting errors on a
defective or absent channel card.
B. Channel Monitor Configuration
The Private Line Monitor control function for each channel may be defined using this menu.
You will be prompted for the channel number, which must have been previously defined.
The default control functions are 2050 Hz for tone remotes and -2.5 mA for DC remotes.
C. Channel Paging Configuration
The Model 4010 Console allows certain paging parameters to be defined (see Figure D-57)
on a per-channel basis. These parameters are in effect only when a page is being transmitted
on the channel. Other audio sources (voice, alerts, etc.) do not use any of these features.
These parameters should be defined for each channel in the system on which you expect to
transmit pages.
Summary of Contents for 4010
