ZETRON 4010, Programming Manual

Page: 15 / 117

Section 2. Installation
025-9229C.1 2-3
2.
3.
4.
Assuming your fixed disk is assigned to drive C:, create the CPS directory by typing
MD C:\CPS and then pressing ENTER . If your fixed disk is assigned to a drive other
than C:, substitute the correct drive letter in the above command.
Copy the CPS master diskette files to your fixed disk by typing
COPY A: C:\CPS
and
then pressing
ENTER
.
When the files are copied, remove the CPS master diskette from drive A: and store it
in a cool, dry, safe place. Hopefully, you will never need it again.
You have just created your CPS working directory. Whenever you want to run the Model
4010 CPS program, type the following:
CD \CPS <ENTER>
4010 <ENTER>