ZETRON 4010, Programming Manual

Page: 103 / 117

Appendix D. CPS Menu Structure
Tone Frequency (250Hz - 3270Hz) [1000]
ON Duration (0-6000) milliseconds [500 ]
OFF Duration (0-6000) milliseconds [200 ]
Number of beeps or Delay Time (0-9) [5]
Alert Duration (seconds) [10.0]
BEEPS / DELAY
ALERT DURATION
BEEP ALERT
BEEP ALERT
BEEP ALERT
Figure D-60. Beep Alert and Delay Function Windows
The Beep Alert consists of a sequence of beeps whose frequency, duration, and count are
defined by the first four windows shown in Figure D-60.
The Delay function is used to create a delay within a paging stack during which time the
Model 4010 console stops all transmission, opens the channel PTT relay, and is in the receive
mode for the number of seconds specified in the fourth window shown in Figure D-60. After
this time, the normal transmit mode is resumed and paging continues with the next page in
the stack.
The Alert Duration window is used to specify the duration of paging alerts 1 through 4.
E. Edit Custom Calls
This selection is used to define your own custom two-tone pages (such as Plectron). Custom
Calls cannot be defined until this format has been assigned a leading digit (as described
above). The windows shown in Figure D-61 will be displayed after this selection.
Second Tone (250-3270 Hz) [1640]
Duration (0-6000) Ms [4500 ]
Gap Duration (0-6000) Ms [80 ]
Talk Time (0-30) Seconds [0_]
First Tone (250-3270 Hz) [800 ]
Enter Custom Call # [ 11]
Duration (0-6000) Ms [1200]
Figure D-61. Edit Custom Calls Windows
025-9229C.1 D-39