YOKOGAWA ScopeCorder DL950 User Manual Download Page 285

Page: 285 / 316

20-11

IM DL950-02EN

20.7 Using SNTP to Set the Date and Time

This section explains how to use SNTP to set the Instrument’s date and time.

Items Common to Scope Mode and Recorder Mode

•  SNTP server
•  Timeout
•  Executes clock adjustment
•  Automatic adjustment

► “SNTP (SNTP)” in the Features Guide

UTILITY Network Menu

On the waveform screen’s MENU, tap

OTHERS

UTILITY

, or press

UTILITY

Tap

Network

, or press the soft key. The following screen appears.

Select Network.

Configure the FTP server. ► sec. 20.3

Configure the Web server. ► sec. 20.4

Configure the TCP/IP settings

► sec. 20.2

Configure mail settings. ► sec. 20.6

Configure network printing. ► sec. 20.8

Configure the network drive. ► sec. 20.5

See “Configuring the SNTP settings.”

Configure the TCP/IP settings

► sec. 20.2 (/C60 option)

Configuring the SNTP Settings (SNTP)

Tap

SNTP

, or press the soft key. The following screen appears.

Set the timeout value (1 to 60 s).

Set the SNTP server (IP address, or when DNS

is enabled, the host name and domain name).

Turns automatic adjustment on or off

Executes clock adjustment

Selects 1G or 10G (displayed for the /C60 option)

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Related manuals for ScopeCorder DL950

Brands by name

Popular brands

YOKOGAWA ScopeCorder DL950, User Manual

Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Related manuals for ScopeCorder DL950

Brands by name

Popular brands