manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 301

23-2

IM DL950-02EN

23.1  Storing and Recalling Setup Data

This section explains how to save the instrument settings to the internal memory and how to load 
settings from the internal memory.

Items Common to Scope Mode and Recorder Mode

•  Storing and recalling setup data

►

 “Setup Data Store/Recall (Store/Recall)” in the Features Guide

SETUP Store/Recall Menu

1.

  On the waveform screen’s MENU, tap 

SETUP

 > 

SETUP

, or press 

SETUP

. The following 

screen appears.

  

See “Storing Setup Data.”

See “Recalling Setup Data.”

Storing Setup Data

2.

 Tap 

Store

, or press the soft key. The following screen appears.

  

Comment

Starts storing.

Deletes the selected setup data.

Set a comment to display in the list.

Date and time when data was stored.

Factory default settings

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands