2-7
IM DL950-02EN
Setting the Filter Type (Filter Type)
Setting the Gauss, Sharp, IIR, or IIR-Lowpass Filter
4.
Set
Bandwidth
to
Digital
.
5.
Tap
Filter Type
, or press the soft key. A Filter Type setup menu appears.
Set the cutoff frequency.
Select Gauss, Sharp, IIR, or
IIR-Lowpass.
Select Low-Pass or
High-Pass.
(Fixed to Low-Pass for
IIR-Lowpass)
Set the bandwidth.
(The available bandwidths
vary depending on the center
frequency setting.)
When Filter Band is set to Low-Pass or
High-Pass
When Filter Band is set to Band-Pass
Select Gauss, Sharp, or IIR.
Select Band-Pass.
Set the filter’s center
frequency.
For Band-Pass, set the center frequency and the bandwidth, the frequencies before and
after the center frequency.
Setting the Moving Average (Mean)
4.
Set
Filter Type
to
Mean
.
Select Mean (moving average).
Set the number of taps.
Set the number of sampling points
of the moving average filter.
Set the bandwidth limit to Digital.
2.1 Configuring Voltage Measurements (on modules other than 16-CH temperature/voltage input modules)
