YOKOGAWA ScopeCorder DL950 User Manual Download Page 122

Page: 122 / 316

5-4

IM DL950-02EN

5.3 Setting the Grid and Interpolation Method

This section explains the waveform information and preference settings for displaying waveforms.

Items Common to Scope Mode and Recorder Mode

• Grid
• Interpolation method

► “Grid (Graticule)” and “Interpolation Method (Dot Connect)” in the Features Guide

Display Menu

On the waveform screen’s

MENU

tap

DISPLAY > DISPLAY

, or press

DISPLAY

. The Display

menu appears.

See “Setting the Grid.”

Set the interpolation method (OFF(2k), OFF(100k),

Sine, Line, Pulse).

Set the display format. ► sec. 5.1

Select the display group you want to edit. ►

sec. 5.1

Detail setup ► sec. 5.4

Set the waveform arrangement, color, and grouping.

► sec. 5.2
Turns accumulation on or off (Scope mode only)

► sec. 5.5

Setting the Grid (Graticule)

Tap

Graticule

, or tap the soft key. The following window appears.

Set the grid type.

Turns the detailed grid display on or off

Set the grid intensity (1 to 8).

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Related manuals for ScopeCorder DL950

Brands by name

Popular brands

YOKOGAWA ScopeCorder DL950, User Manual

Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Related manuals for ScopeCorder DL950

Brands by name

Popular brands