manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 265

19-19

IM DL950-02EN

19.7  Loading Waveform Data

This section explains the following settings for loading waveform data:

Items Common to Scope Mode and Recorder Mode

•  Displaying file information
•  Loading into channels

► “Loading Waveform Data (Waveform)” in the Features Guide

FILE Waveform (Load) Menu

1.

  On the waveform screen’s 

MENU

, tap 

FILE

 > 

FILE

, or press 

FILE

.

2.

 Tap 

Waveform

 under Load, or press the soft key. The following screen appears.

  

Select the .WDF file that you want to load.

Displays file information

Starts loading

Selecting a File

Select the file to load from the file list. For details on file operations, see section 19.10.

Loading Waveform Data (Load)

•   The selected waveform data file is loaded together with the setup file. The extension is .WDF. 

Loaded data is cleared when you start measurement.

•   If the module configuration when the waveform data is saved and that when the data is loaded 

are different, only the waveform data of modules that match is loaded. When loading is complete, 
a message indicating the channel numbers that were not loaded is displayed.

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands