manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 131

6-3

IM DL950-02EN

6.2  Setting the Display Conditions for X-Y 

Waveforms

This section explains the following settings for the display conditions of X-Y waveforms:

Items Common to Scope Mode and Recorder Mode

•  Display range
•  Turning pen markers on and off
•  Main window’s display ratio
•  Window layout
•  Turning combine display on and off
•  Interpolation
•  The number of data points that are used to display waveforms
•  Turning trace-clear-on-start on and off

► “X-Y Waveform Display” in the Features Guide

X-Y menu

1.

  On the waveform screen’s 

MENU

, tap 

DISPLAY 

> 

X-Y

, or press 

SHIFT

+

DISPLAY(X-Y)

. The 

X-Y menu appears.

  

Set the trace. 

► sec. 6.1

Displays the second 

page of the menu

X-Y menu (1/2)

Set the display interpolation (OFF, Line).

Displays the first page of the menu

X-Y menu (2/2)

Set whether to clear waveforms at 

the start of acquisition (ON/OFF).

Set the cursor.

► sec. 6.3

Set the pen marker.

Set the main window’s display ratio.

(50%, 20%, 0%)

Set the window layout (Side, Vertical).

Select whether to superimpose 

Window1 and Window2 (ON/OFF).

Set the number of data points that are 

used to display waveforms (2k, 100k).

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands