manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 242

18.1  Printing on a Network Printer

This section explains the following settings for printing images displayed on the instrument on a 
network printer:

Items Common to Scope Mode and Recorder Mode

•  Print destination
•  Printer type
•  Color
•  Comment

► “Printing on a Network Printer (Network Print)” and

“Printing and Saving Screen Captures (IMAGE SAVE key)” in the Features Guide

IMAGE SAVE Menu

1.

  On the waveform screen’s 

MENU

, tap 

FILE

 > 

IMAGE SAVE MENU

, or press 

SHIFT+IMAGE 

SAVE (MENU)

. The following screen appears.

 

Set the print destination to 

Network Print.
Set the output format 

(fixed to PCL Laser).

Turns color printing on or off

Set comments.

Note

You must configure the network printer in advance by following the instructions in section 20.8.

Printing

2.

 Press 

IMAGE SAVE

 to print the image that is displayed on the screen using a network printer.

18-2

IM DL950-02EN

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands