manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 79

3-7

IM DL950-02EN

Data Saved When Data Acquisition Is Complete and the Operation Performed

•  Binary: Waveform data is saved in WDF format.
•  ASCII: Waveform data is saved in ASCII format.
•  MATLAB: Waveform data is saved in MATLAB format.
•  Save Image: Screen capture data is saved (PNG, BMP, JPEG).
•  Measure Value Save: Waveform parameter measurement values are saved.
•  Beep: A beep sound is generated.
•  Send Mail: A mail message is sent.

When Acquisition Method Is Set to SSD Recording (/ST1 option)

  

Set the acquisition method.

Select SSD Recording.

Set a comment.

Set the item to append to the 

file name.

Set the number of file divisions.

Set the file name.
Set the file division.

3.2  Setting Conditions for Waveform Acquisition (Recorder mode)

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands