manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 228

17-2

IM DL950-02EN

17.1  Power Analysis (Power)

This section explains the following settings for performing power analysis:

Items Common to Scope Mode and Recorder Mode

•  Power analysis mode
•  Selecting power analysis items
•  Power analysis reset

► “Power Math (/G05 option)” in the Features Guide

Power Analysis Menu (Power)

1.

  On the waveform screen’s 

MENU

, tap 

ANALYSIS 

 > 

ANALYSIS

, or press 

SHIFT+HISTORY 

(ANALYSIS)

.

2.

 Tap 

Power

, or press the soft key. A power analysis menu appears.

  

See “Setting the Power 

Analysis Mode.”

Configure harmonic analysis. 

► sec. 17.2

Configure power 

analysis.

Set the numeric display.

Display Group: Numeric display of 

the waveforms registered in the 

display group

Power: Numeric display of power 

analysis

Harmonic: Numeric display of 

harmonic measurement

Setting the Power Analysis Mode (Analysis Mode)

3.

 Tap 

Analysis Mode

, or press the soft key. The following screen appears.

 

Set the analysis mode.

  

See “Setting the Power Analysis Source.”

Set one analysis 

source.

Set two analysis 

sources.

Resets the integrated value of Wiring System1

Resets the integrated value of Wiring System2

(Appears when the analysis mode is set to 2Wiring)

Resets the integrated value of Wiring System1 and 2

(Appears when the analysis mode is set to 2Wiring)

Menu when the analysis mode is 2 Wiring System

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands