manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 195

13-7

IM DL950-02EN

13.4  Performing User-Defined Math (/G02 option)

This section explains the following settings for user-defined math:

Items Common to Scope Mode and Recorder Mode

•  Setting user-defined math functions

► “User-Defined Math Function (User Define)(/G02 option)” in the Features Guide

Math Menu

1.

  On the waveform screen’s MENU, tap 

ANALYSIS > MATH

, or press 

SHIFT+FFT (MATH)

. The 

Math menu appears.

  

Set the math mode to ON.

See “Setting the Expression.”

Set the math waveform to set scaling. ► sec. 13.2

Set the scaling mode. ► sec. 13.2

Set averaging. ► sec. 13.3

(For user-defined math function, /G02 option)

Set the upper and lower limits. ► sec. 13.2

Set the math range. ► sec. 13.1

Setting the Expression (Setup)

2.

 Tap 

Setup

, or press the soft key.

3.

  Tap the math number that you want to assign an expression to, or use a jog dial and arrow 

keys to select the math number, and press 

SET

. The following screen appears.

  

Set the operator to User 

Define.

Set the expression.

Set the label.

Set the unit.

Math 

number

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands