YOKOGAWA ScopeCorder DL950 User Manual Download Page 78

Page: 78 / 316

3-6

IM DL950-02EN

Detail Setup (Detail)

Tap

Detail

, or press the soft key. The following screen appears.

When Acquisition Method Is Set to Memory

Set the acquisition method.

Select Memory.

Set the time base.

When the time base is External

Set the pulse count or

rotation count.

Set the acquisition mode.

► sec. 3.1

When Acquisition Method Is Set to Save on Stop

Set the acquisition method.

Select Save on Stop.

Set action to perform when data

acquisition is completed.

Detail setup

Turn waveform data saving on or off,

and set the data format.

Turns waveform parameters

saving on or off

Set the save destination and the file

name for waveform parameters.

Turns beep sound and mail

transmission on or off

Turn image data saving on or off, and set

the data format.

3.2 Setting Conditions for Waveform Acquisition (Recorder mode)

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Brands by name

Popular brands

YOKOGAWA ScopeCorder DL950, User Manual

Search results

Summary of Contents for ScopeCorder DL950

Reviews:

Brands by name

Popular brands