manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 175

11-7

IM DL950-02EN

11.2  Performing Continuous Statistical Processing

This section explains the following setting for performing continuous statistic processing on the 
displayed waveforms:

Items Common to Scope Mode and Recorder Mode

•  Turning statistical processing on

► “Continuous Statistical Processing (Continuous)” in the Features Guide

MEASURE Statistics Menu

1.

  On the waveform screen’s MENU, tap 

ANALYSIS

 > 

MEASURE

, or press 

MEASURE

.

2.

 Tap 

Statistics

, or press the soft key. The following screen appears.

  

Set the measurement 

time period.

► sec. 11.1

Turns automated 

measurement on or off

► sec. 11.1

Set the source waveform 

and measurement items.

► sec. 11.1

Detail setup

► sec. 11.1

Set the indicator.

► sec. 11.1

Configure Area2.

► sec. 11.1

Set Mode to ON.

Set Type to Continuous.

Measure menu

Statistics menu

Configure statistical 

processing.

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands