Yamaha CEmarking RCX221, User Manual

Page: 434 / 468

9-28
Chapter
9
TROUBLESHOOTING
9.34 : Sys. generation mismatch
Code : &H0922
Meaning/Cause : Mistake made in specifying the robot type/axis number of
system generation data.
Action : Redo the system generation correctly.
9.35 : Program too big
Code : &H0923
Meaning/Cause : Source program size exceeded the permissible size.
Action : Compress the source program size.
9.36 : Task data destroyed
Code : &H0924
Meaning/Cause : Part or all of the data used in a task has been destroyed.
Action : Reset the program.
9.37 : Object program destroyed
Code : &H0925
Meaning/Cause : Part or all of an object program has been destroyed.
Action : Make the object program again.
9.38 : Sequence object memory full
Code : &H0926
Meaning/Cause : Sequence object program exceeded its memory capacity.
Action : Compress the source size of sequence program, so that the
object program size is reduced.
9.39 : Sequence object destroyed
Code : &H0927
Meaning/Cause : Part or all of the sequence object program has been destroyed.
Action : Make the sequence object program again.
9.40 : Cannot found sequence object
Code : &H0928
Meaning/Cause : No sequence object program.
Action : Make the sequence object program.
9.41 : Local variable memory full
Code : &H0929
Meaning/Cause : Number of local variables defined within subroutine has
exceeded upper limit.
Action : 1. Reduce number of local variables defined in the subroutine.
2. Use the global variable.
[ 9] Memory errors