Yamaha CEmarking RCX221, User Manual

Page: 102 / 468

4-34
Chapter
4
OPERA
TION
9. "AUTO" mode
• When the program "_SELECT" exists:
1) Press (RESET) in "AUTO" mode.
The following message appears on the guideline when "_SELECT" exists among
the programs. Press (YES) to reset the selected program by switching it to
"_SELECT", or press (NO) to just reset the current program.
■
Program reset (3)
AUTO [T1] 50% <TEST1 >
1 *ST:
2 MOVE P, P0
3 MOVE P, P1
4 MOVE P, P2
5 GOTO *ST
Change to _SELECT OK? YES NO
2) When (NO) is pressed in Step 1), the following message then appears on the
guideline.
Press (YES) to reset the current program, or press (NO) to cancel the
reset.
■
Program reset (4)
AUTO
[T1] 50% <TEST1 >
1 *ST:
2 MOVE P, P0
3 MOVE P, P1
4 MOVE P, P2
5 GOTO *ST
Reset program OK? YES NO
n
NOTE
The output is also reset when the program is reset. However, the output will
not be reset when a sequence program is being executed without selecting
"RST.DO" in the sequencer execution "ENABLE/DISABLE" fl ag setting.