Yamaha CEmarking RCX221, User Manual

Page: 136 / 468

4-68
Chapter
4
OPERA
TION
10. "PROGRAM" mode
10.3.5 Erasing a program
Unnecessary programs in the directory can be erased.
c
CAUTION
• Programs with an "RO (read only)" attribute cannot be erased. When
these programs must be erased, change the attribute.
• To change the program attribute, refer to "10.3.7 Changing the program
attribute".
[Procedure]
1) In "PROGRAM>DIR" mode, use the cursor (
↑
/
↓
) keys to select the program to be
erased.
2) Press (ERASE) to enter "PROGRAM>DIR>ERASE" mode.
A confirmation message appears on the guideline.
■
Erasing a program
PROGRAM >DIR>ERASE
<TEST1 >
No. RW/RO
1 TEST1 55 952 RW
2 *TEST2 50 907 RW
3 PARTS100 38 843 RW
4 TEST100 100 1968 RW
Erase program OK?
YES NO
Name Line Byte
3) Press (YES) to erase the selected program.
Press (NO) if you want to cancel erasure.
After the program is erased, the lower program names move upward.
■
After erasing a program
PROGRAM >DIR <TEST2 >
No. RW/RO
1 *TEST2 50 907 RW
2 PARTS100 38 843 RW
3 TEST100 100 1968 RW
4 TEST200 80 1525 RW
NEW INFO
Name Line Byte