Yamaha CEmarking RCX221, User Manual

Page: 425 / 468

9-19
Chapter
9
TROUBLESHOOTING
5.44 : Cannot use external label
Code : &H052C
Meaning/Cause : Command cannot use an external label.
Action : 1. Change to an internal label.
2. Change execution command.
5.45 : Illegal program name
Code : &H052D
Meaning/Cause : a. When transmitting a program file by SEND command, the
NAME statement was not defined on beginning line of the
program data.
b. Characters other than alphanumeric and underscore ( _ )
were used in the program name.
c. Program name has exceeded 8 characters.
Action : 1. Define NAME statement on beginning line of program data.
2. Use only alphanumeric and underscore ( _ ) characters in
the program name.
3. Use 8 characters or less in the program name.
5.46 : Too many identifiers
Code : &H052E
Meaning/Cause : Number of identifiers exceeded 500.
Action : Ensure the number of identifiers is within 500 items.
5.47 : CASE without SELECT
Code : &H052F
Meaning/Cause : There is no SELECT statement corresponding to CASE statement.
Action : 1. Delete the CASE statement.
2. Add a SELECT statement corresponding to the CASE statement.
5.48 : END SELECT without SELECT
Code : &H0530
Meaning/Cause : There is no SELECT statement corresponding to END SELECT
statement.
Action : 1. Delete the END SELECT statement.
2. Add a SELECT statement corresponding to the END SELECT
statement.
5.49 : SELECT without END SELECT
Code : &H0531
Meaning/Cause : There is no END SELECT statement corresponding to SELECT
statement.
Action : 1. Delete the SELECT statement.
2. Add an END SELECT statement corresponding to the SELECT
statement.
[ 5] Robot language syntax (compiling) errors