Yamaha CEmarking RCX221, User Manual

Page: 132 / 468

4-64
Chapter
4
OPERA
TION
10. "PROGRAM" mode
Contents of each item are shown below.
Item Description
No.
Indicates the serial number of the program. The number
of the program which is currently selected is highlighted
(reversed background).
Name
Indicates the program name.
The " * " mark (reversed background) shows this
program is compiled and the object program exists.
The " s " mark (reverse background) shows an object
exists in the sequence program.
Line Shows the number of lines in the program.
Byte Shows how many bytes of memory the program uses.
RW/RO
Indicates the program attribute.
RW : Reading or writing enabled.
RO : Reading only enabled; writing inhibited.
Date Shows the date when the program was made or edited.
Time Shows the time when the program was made or edited.
Valid keys and submenu descriptions in "PROGRAM >DIR" mode are shown below.
Valid keys Menu Function
Cursor key
(
↑
/
↓
)
Selects the program or scrolls the screen vertically.
Cursor key
(
←
/
→
)
Switches between the program information display and
the date/time display.
Page key
(
〈〈
/
〈〈
)
Switches to other screens.
F1 NEW Registers a new program name.
F5 INFO Shows the number of bytes used for the entire program.
F6 COPY Copies the program.
F7 ERASE Erases the program.
F8 RENAME Renames the program.
F10 ATTRBT Changes the program attribute.
F11 OBJECT Shows the object program information.
F15 EXAMPLE Automatically creates the program name "FUNCTION".