manualshive.com logo in svg

Yamaha CEmarking RCX221, User Manual

Share
Download
Yamaha CEmarking RCX221 User Manual Download Page 267

4-199

Chapter

4

OPERA

TION

12. "SYSTEM" mode

1.  CMU (communication) mode

This parameter sets the communication mode on the computer.

n

NOTE

•  Online commands can be executed only in "ONLINE" mode.

•  The CMU (communication) mode can be changed with either ONLINE or 

OFFLINE statements in robot language.

[Procedure]

1) Select "1. CMU mode" in "SYSTEM>CMU" mode.

2) Press 

 (EDIT).

The function key menu changes.

■

  Setting the "CMU mode"

SYSTEM

>CMU V9.00

  

1.CMU mode

  

 

ONLINE

  2.Data bits 

 8

  3.Baud rate 

 9600

  4.Stop bit  

 1

  5.Parity    

ODD

ONLINE

OFFLINE

3) Select the communication mode with 

 (OFFLINE) or 

 (ONLINE).

4) Press 

 to quit the setting. To continue selecting other items, use the cursor (

↑

/

↓

) 

keys.

Summary of Contents for CEmarking RCX221





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands