Yamaha CEmarking RCX221, User Manual

Page: 287 / 468

4-219
Chapter
4
OPERA
TION
12. "SYSTEM" mode
1. "SERVICE" mode level
Set the service mode level by referring to the table below.
n
NOTE
The settings made here are only valid until the controller power is turned off.
Save these settings if you want to use them again after power is turned off.
w
WARNING
SETTINGS MAY BE CHANGED BUT THE CUSTOMER MUST BEAR RESPONSIBILITY
FOR THEM. THE CUSTOMER SHOULD KEEP SAFETY IN MIND WHEN MAKING
CHANGES.
Description
Hold to Run function AUTO mode operation
Level 0 Disabled Allowed
Level 1 Enabled Allowed
Level 2 Disabled Prohibited
Level 3 Enabled Prohibited
[Procedure]
1) Select "1. Service level" in "SYSTEM>OPTION>SERVICE" mode.
2) Press (EDIT).
■
Editing the "SERVICE" mode level
SYSTEM >OPTION>SERVICE V9.00
1.Service level
2.Movement Vel <3%
3.Operating device RPB
LEVEL 0 LEVEL 1 LEVEL 2 LEVEL 3
LEVEL 3
3) Select the "SERVICE" mode level with (LEVEL 0) to (LEVEL 3).
4) Press to quit the setting. To continue selecting other items, use the cursor (
↑
/
↓
)
keys.