Yamaha CEmarking RCX221, User Manual

Page: 188 / 468

4-120
Chapter
4
OPERA
TION
11. "MANUAL" mode
2) Press (RANGE) to enter the "MANUAL>SHIFT>RANGE" mode.
A cursor for editing the shift coordinate range appears.
■
Editing shift coordinate range (1)
MANUAL >SHIFT>RANGE 50% [MG][S1H0X]
————————————x———————y———————z———————r———
Range of shift coorinate [mm/deg]
SP1 =_ 0.00 0.00 0.00 0.00
SM1 = 0.00 0.00 0.00 0.00
[POS] 150.00 0.00 0.00 0.00
UNDO
3) Use the cursor (
←
/
→
) keys to move the cursor to the position you want to change.
4) Use to , , , and to enter the point data.
Enter a space to separate between the data for x and y. The data input formats are as
follows.
• To enter the data in Cartesian coordinates ("mm" units)
Enter a number consisting of an integer portion of up to 5 digits and having 2 or
less places below the decimal point.
±###.##, ±####.#, ±#####.
n
NOTE
Enter point data for both X-axis and Y-axis. If omitted, "0" will be
automatically entered for that axis.
■
Editing shift coordinate range (2)
MANUAL >SHIFT>RANGE 50% [MG][S1H0X]
————————————x———————y———————z———————r———
Range of shift coorinate [mm/deg]
SP1 = 300.00 300.00
SM1 = 0.00 0.00 0.00 0.00
0.00 0.00
[POS] 150.00 0.00 0.00 0.00
UNDO
5) Press , cursor up/down (
↑
/
↓
) keys or page up/down ( , ) keys to
finish the data input.
Press if you want to cancel the data input.