manualshive.com logo in svg

Yamaha CEmarking RCX221, User Manual

Share
Download
Yamaha CEmarking RCX221 User Manual Download Page 289

4-221

Chapter

4

OPERA

TION

12. "SYSTEM" mode

3.  Operating device in "SERVICE" mode

Specify the operating device to use.

n

NOTE

The settings made here are only valid until the controller power is turned off. 

Save these settings if you want to use them again after power is turned off. 

w

WARNING

SETTINGS MAY BE CHANGED BUT THE CUSTOMER MUST BEAR RESPONSIBILITY 

FOR THEM. THE CUSTOMER SHOULD KEEP SAFETY IN MIND WHEN MAKING 

CHANGES.

Description

RPB

Only RPB operation is allowed.

RPB/DI

Allows RPB and dedicated input.

RPB/COM

Allows RPB and online commands.

ALL

Allows operation by all devices.

[Procedure]

1) Select "3. Operating device" in "SYSTEM>OPTION>SERVICE" mode.

2) Press 

 (EDIT).

■

  Editing the "SERVICE" mode devices

SYSTEM

>OPTION>SERVICE

           V9.00

  1.Service level

  2.Movement Vel

 

3.Operating device

 

 

RPB

RPB/DI

RPB/COM

ALL

LEVEL 3

<3%

RPB

3) Select the operating device with 

 (RPB) to 

 (ALL).

4) Press 

 to quit the setting. To continue selecting other items, use the cursor (

↑

/

↓

) 

keys.

Summary of Contents for CEmarking RCX221





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands