Yamaha CEmarking RCX221, User Manual

Page: 171 / 468

4-103
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.2.9 Point data error reset
If an error "9.2 Point data destroyed" occurs in the point data, this function resets the error
and allows you to continue editing.
c
CAUTION
This function resets an error, but does not restore the point data. A problem is
probably occurring in the point data, so check and correct the point data in
"MANUAL>POINT>EDIT" mode.
n
NOTE
This reset function does not work if an error "9.3 Memory destroyed" occurs.
In this case, initialize the memory.
[Procedure]
1) Press (ERR. RST) in "MANUAL>POINT" mode.
A confirmation message appears on the guideline.
■
Resetting a point data error
MANUAL >POINT 50% [MG][S0H0X]
————— 9.2:Point data destroyed—————————
P30 = 100.00 250.00
P31 = 50.00 100.00
P32 = 122.62 -24.54
Error reset OK?
YES NO
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
2) Press (YES) to reset the error.
Point data can be edited after resetting the error.
Press (NO) if you want to cancel the error reset.