manualshive.com logo in svg

Yamaha CEmarking RCX221, User Manual

Share
Download
Yamaha CEmarking RCX221 User Manual Download Page 200

4-132

Chapter

4

OPERA

TION

11. "MANUAL" mode

7) Press 

 to quit editing and return to "MANUAL>HAND" mode.

n

NOTE

The hand defi nition data with which the cursor was positioned when 

returning to "MANUAL>HAND" mode is used as the current hand defi nition.

Valid keys and submenu descriptions in "MANUAL>HAND>EDIT" mode are shown below.

Valid keys

Menu

Function

F1

UNDO

Reverses the last data input and restores the preceding 
data.

11.6.1.1 Restoring hand definitions

[Procedure]

1) During hand definition editing, pressing 

 (UNDO) reverses the last data input 

and restores the preceding data.
This function is enabled only on lines that are not yet complete.

Summary of Contents for CEmarking RCX221





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands