Yamaha CEmarking RCX221, User Manual

Page: 170 / 468

4-102
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.2.8.6 Point comment search
Point comments already entered can be located.
n
NOTE
A point comment can be up to 15 characters.
[Procedure]
1) Press (FIND) in "MANUAL>POINT>COMMENT" mode.
The message "Character string >" appears on the guideline.
2) Enter the character string you want to search for, and press .
A maximum of 15 characters can be used.
■
Searching for a point comment (1)
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00
P8 =
P9 = 122.62 -24.54
Character string >WAIT_
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
3) Search starts from the cursor position towards the end of the program and stops at the
first matching character string.
■
Searching for a point comment (2)
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P334 = 100.00 250.00
P335 =
P336 = 122.62 -24.54
EDIT TEACH JUMP VEL+ VEL-
COMNT : WAIT_PICKUP [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
4) To continuously search for another character string, press (FIND+) or
(FIND-).
Pressing (FIND+) restarts the search from the current cursor position towards
the end of the program and stops at the first matching character string.
Pressing (FIND-) restarts the search from the current cursor position towards
the top of the program and stops at the first matching character string.