Yamaha CEmarking RCX221 User Manual Download Page 306

Page: 306 / 468

4-238

Chapter

OPERA

TION

12. "SYSTEM" mode

12.5.1 Controller

check

This makes a self-diagnosis check of the controller.

NOTE

• An error message will always appear if DC 24V is not supplied to STD.DIO.

• An error message will always appear if DC 24V is not supplied to the

option DIO.

[Procedure]

1) Press

(CHECK) to enter "SYSTEM>DIAGNOS>CHECK" mode.

■

System check

SYSTEM

>DIAGNOS>CHECK V9.00

System check OK !!

NEXT P.

PREV.P.

An error message appears if an error is detected.

2) Check the error message if displayed.

Pressing the cursor (

↑

↓

) keys changes the display one line at a time.

Pressing

(NEXT P.) or

(PREV. P.) changes the display one screen at a

time.

3) Press

to return to "SYSTEM>DIAGNOS" mode.

Summary of Contents for CEmarking RCX221





















































































































































































































































































































































































































































































Search results

Summary of Contents for CEmarking RCX221

Reviews:

Brands by name

Popular brands

Yamaha CEmarking RCX221, User Manual

Search results

Summary of Contents for CEmarking RCX221

Reviews:

Brands by name

Popular brands