manualshive.com logo in svg

Yamaha CEmarking RCX221, User Manual

Share
Download
Yamaha CEmarking RCX221 User Manual Download Page 330

4-262

Chapter

4

OPERA

TION

14.1.2 

Motor power and servo on/off

This is usually used with the motor power turned on.
This operation is performed after emergency stop has been cancelled or when turning the 
servo on/off temporarily in order to perform direct teaching.

n

NOTE

When using a PHASER series robot, noise is emitted for 0.5 to 2 seconds 

during the fi rst servo-on after turning the power on. This is just the routine 

pre-action for obtaining information needed to control the robot and is not 

a problem.

c

CAUTION

At axes with brakes, the brake can be released by pressing 

 (Free) 

( 

 in controller versions prior to Ver. 9.13). Use particular care with 

regard to heavy up/down vertical axes, as they may drop when the brake is 

released.

[Procedure]

1) Press 

 (MOTOR) in "UTILITY" mode.

2) Press 

 (On) to turn on the motor power supply and servo.

Press 

 (Off) to turn off the motor power supply and servo.

Press 

 (Power) to turn on the motor power supply only.

■

 Servo on/off

UTILITY>MOTOR

motor power: Off

D1=M1: Brake 

D5=M5: no axis

D2=M2: Brake 

D6=M6: no axis

no axis

no axis

D3=M3: 

 D4=M4: 

On

Off

3) Press 

 to return to the mode selected just previous to "UTILITY" mode.

14. "UTILITY" mode

Summary of Contents for CEmarking RCX221





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands