Yamaha CEmarking RCX221, User Manual

Page: 257 / 468

4-189
Chapter
4
OPERA
TION
12. "SYSTEM" mode
12.1.4.1 Option DIO setting
Make the DIO option board setting as explained below.
Parameter Meaning
1 Board condition
Sets whether to issue an error "12.31: DI DC24V
disconnected" when the 24V power supply is not
connected.
When set to "INVALID", no error will be issued even if
the DC 24V power supply is disconnected.
This parameter cannot be set to "INVALID" while the
24V power supply is connected to the DIO board.
This parameter automatically changes to "VALID" when
the 24V power supply is connected.
2
IO cmd (DI05)
(when ID=1)
Sets whether to use the dedicated input DI05 (IO
command run) function.
This is available only for the DIO board with ID=1.
[Procedure]
1) In "SYSTEM>PARAM>OP. BRD" mode, select "DIO_N(n)" or "DIO_P(n)" and press
(SELECT).
2) Press (EDIT).
■
Option DIO setting
SYSTEM >PARAM>OP.BRD V9.00
1.Board condition
2.IO cmd(DI05)
VALID
INVALID
INVALID
VALID
3) Press (INVALID) or (VALID) to change the setting.
4) Select the parameter to be edited using the cursor (
↑
/
↓
) keys.
5) Press to end the setting.