![Yamaha CEmarking RCX221 User Manual Download Page 155](http://html2.mh-extra.com/html/yamaha/cemarking-rcx221/cemarking-rcx221_user-manual_3060670155.webp)
4-87
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.2.1
Point data input and editing
[Procedure]
1) In "MANUAL>POINT" mode, use the cursor (
↑
/
↓
) keys to select the point to edit.
2) Press
(EDIT) to enter "MANUAL>POINT>EDIT" mode.
An edit cursor appears at the left end of the point line data that was selected.
■
Editing point data
MANUAL
>POINT>EDIT 50% [MG][S0H0J]
————————————x———————y———————z———————r———
P7 = 100.00 250.00
P8 =
P9 = 122562 -24654
UNDO
JUMP
COMNT :
[ ]
[POS] 50.00
100.00 0.00 0.00
0.00 0.00
0.00 0.00
3) Use
to
,
,
,
and
to enter the point data.
Enter a space to separate between the data for x and y. The data input formats are as
follows.
n
NOTE
• Enter point data for both X-axis and Y-axis. If omitted, "0" will be
automatically entered for that axis.
• The error message "Digit number error" appears when the data format is
wrong. Enter it in the correct format.
• To enter the data in joint coordinates ("pulse" units)
Enter an integer of up to 8 digits.
(Even if the input data is less than 8 digits, it will be displayed in 8 digits when the
number of display digits is set to 8 in "SYSTEM>PARAM" mode.)
:
±######
(±########)
• To enter the data in Cartesian coordinates ("mm" units)
Enter a number consisting of an integer portion of up to 5 digits and having 2 or
less places below the decimal point.
(Even if the input data is less than 8 digits, it will be displayed in 8 digits when the
number of display digits is set to 8 in "SYSTEM>PARAM" mode.)
:
±###.##,±####.#,±#####.
(±#####.##,±#####.#,±#######.)
Summary of Contents for CEmarking RCX221
