Woodward MRM4, Manual

Page: 75 / 460

Input, Output and LED Settings
Parameter Description Setting range Default Menu path
Inverting 6 Inverting of the state of
the assigned signal. inactive,
active
inactive [Device Para
/Binary Outputs
/BO-5 X2
/BO 3]
Assignment 7 Assignment 1..n, Assignment List -.- [Device Para
/Binary Outputs
/BO-5 X2
/BO 3]
Inverting 7 Inverting of the state of
the assigned signal. inactive,
active
inactive [Device Para
/Binary Outputs
/BO-5 X2
/BO 3]
t-hold To clearly identify the
state transition of a
binary output relay, the
"new state" is being hold,
at least for the duration of
the hold time. 0.00 - 300.00s 0.00s [Device Para
/Binary Outputs
/BO-5 X2
/BO 4]
t-Off Delay Switch Off Delay 0.00 - 300.00s 0.00s [Device Para
/Binary Outputs
/BO-5 X2
/BO 4]
Latched Defines whether the
Relay Output will be
latched when it picks up. inactive,
active
inactive [Device Para
/Binary Outputs
/BO-5 X2
/BO 4]
Acknowledgement Acknowledgement Signal
- An acknowledgement
signal (that
acknowledges the
corresponding binary
output relay) can be
assigned to each output
relay. The
acknowledgement-signal
is only effective if the
parameter "Latched" is
set to active.
Only available if: Latched
= active
1..n, Assignment List -.- [Device Para
/Binary Outputs
/BO-5 X2
/BO 4]
Inverting Inverting of the Binary
Output Relay. inactive,
active
inactive [Device Para
/Binary Outputs
/BO-5 X2
/BO 4]
EN MRM4 01/11 Page 75