Woodward MRM4, Manual, Page: 142 / 460

Acknowledgments
Within the menu [Protection Para\Global Prot Para\TripControl] you can assign a signal that:
•
Acknowledges a pending trip command.
For details, please refer to chapter » TripControl« .
External Acknowledge via Smart View
In case Smart View is not running – please start it.
•
If the device data were not yet loaded – select »Receive Data From The Device« from menu »Device«.
•
Double click on icon »Device Parameter« in the navigation tree.
•
Double click on icon »Ex Acknowledge« within the operation menu.
•
In the working window, you can assign now each one signal that resets all acknowledgeable LEDs, a
signal that resets all binary outputs, a signal that resets the SCADA-signals respectively a signal that
acknowledges a pending trip command.
External LED - Acknowledgment Signals
The following signals can be used for external acknowledgment of latched LEDs.
Name Description
-.- No assignment
DI Slot X1.DI 1 Signal: Digital Input
DI Slot X1.DI 2 Signal: Digital Input
DI Slot X1.DI 3 Signal: Digital Input
DI Slot X1.DI 4 Signal: Digital Input
DI Slot X1.DI 1 Signal: Digital Input
DI Slot X1.DI 2 Signal: Digital Input
DI Slot X1.DI 3 Signal: Digital Input
DI Slot X1.DI 4 Signal: Digital Input
DI Slot X1.DI 5 Signal: Digital Input
DI Slot X1.DI 6 Signal: Digital Input
DI Slot X1.DI 7 Signal: Digital Input
Page 142 EN MRM4 01/11
1..n, Assignment List
Ack LED
1..n, Assignment List
Ack BO
1..n, Assignment List
Ack Scada
Ex Acknowledge.Ack LED
Ex Acknowledge.Ack BO
Ex Acknowledge.Ack Scada