Woodward MRM4, Manual, Page: 221 / 460

Parameters
•
Edit/change the parameter.
Now you can:
•
save the change you made and have them adopted by the system; or
•
change additional parameters and save finally all the altered parameters and have them adopted by the
system.
To save parameter changes immediately,
•
press the »OK« key for saving changed parameters directly and to have them adopted by the device.
Confirm the parameter changes by pressing the »Yes« softkey or dismiss by pressing »No«.
To change additional parameters and save afterwards,
•
move to other parameters and change them.
A star symbol in front of the changed parameters indicates that the
modifications have only temporarily been saved, they are not yet finally
stored and adopted by the device.
In order to make things easier to follow, especially where complex
parameter changes are involved, on every superior/higher-ranking menu
level the intended change of the parameter is indicated by the star symbol
(star trace). This makes it possible to control or follow from the main menu
level at any time where parameter changes have been made and have not
finally been saved.
In addition to the star trace to the temporarily saved parameter changes, a
general parameter changing symbol is faded-in at the left corner of the
display, and so it is possible from each point of the menu tree to see that
there are parameter changes still not adopted by the device.
Press the »OK« key to initiate the final storage of all parameter changes. Confirm the parameter changes by
pressing the »Yes« softkey or dismiss by pressing Softkey »No«.
Plausibility check: In order to prevent obvious wrong settings the device
monitors constantly all temporarily saved parameter changes. If the device
detects an implausibility, this is indicated by a question mark in front of the
respective parameter.
In order to make things easier to follow, especially where complex
parameter changes are involved, on every superior/higher-ranking menu
level, above the temporarily saved parameters an invalidity is indicated by
the question mark (plausibility trace). This makes it possible to control or
follow from the main menu level at any time where implausibilities are
intended to be saved.
In addition to the question mark trace to the temporarily saved implausible
parameter changes a general implausibility symbol/question mark is faded-
in at the left corner of the display, and so it is possible to see from each
point of the menu tree that implausibilities have been detected by the
device.
EN MRM4 01/11 Page 221