Woodward MRM4, Manual

Page: 121 / 460

Smart View
Smart View
Smart View is a parameter setting and evaluation software.
•
Menu-controlled parameter setting incl. validity checks
•
Offline configuration of all relay types
•
Reading and evaluating of statistical data and measuring values
•
Setting into operation assistance
•
Display of the device status
•
Fault analysis via event- and fault recorder
Installation of Smart View
Port 52152 must not be blocked by a Firewall
If the Windows Vista User Access Control pops up while installing Smart
View, please “Allow” all installation requirements concerning Smart View.
System requirements:
Windows 2000 or compatible (e.g. Windows XP, Windows Vista or Windows 7)
•
Double-click on the installation file with the left mouse button.
•
Select a language for the installation procedure.
•
Confirm by pressing the »Continue« button in the INFO frame.
•
Select an installation path or confirm the standard installation path by mouse click on the »Continue«
button.
•
Confirm the entry for the suggested installation folder by mouse click on the »Continue« button.
•
By mouse click on the »Install« button, the installation routine is started.
•
Close the installation procedure by mouse click on the »Complete« button.
Now you can call up the program via [Start>Programs>Woodward>HighPROTEC>Smart View].
Deinstalling Smart View
Via the menu [Start>System Control >Software] the Smart View can be removed from your computer.
Switching the Language of the Graphical User Interface
Within the menu Settings/Language, you can change the language of the graphical user interface.
EN MRM4 01/11 Page 121