Woodward MRM4, Manual

Page: 117 / 460

Navigation - Operation
6 INFO Key
(Signals/Messa
ges)
Looking through the present
LED assignment. The direct
select key can be actuated at
any time. If the INFO key is
actuated again you will leave
the LED menu.
Here only the first assignments
of the LEDs will be shown.
Every three seconds the
»SOFTKEYs« will be shown
(flashing).
Displaying the multiple
Assignments
If the INFO-Button is pressed
only the first assignments of
any LED is shown. Every three
seconds the »SOFTKEYs« will
be shown (flashing).
If there is more than one signal
assigned to a LED (indicated by
three dots), you can check the
state of the multiple
assignments if you proceed as
follows.
In order to show all (multiple)
assignments select a LED by
means of the »SOFTKEYs«
»up« and »down«
Via the »Softkey« »right« call
up, a Sub-menu of this LED
that gives you detailed
information on the state of all
signals assigned to this LED.
An arrow symbol points to the
LED whose assignments are
currently displayed.
Via the »SOFTKEYs« »up«
and »down«, you can call up
the next / previous LED.
In order to leave the LED menu
press the »SOFTKEY« »left«
multiple times.
EN MRM4 01/11 Page 117