Woodward MRM4, Manual

Page: 133 / 460

Measuring Values
Measuring Values
Read out Measured Values
In menu »Operation/Measured Values« both measured and calculated values can be viewed. The measured
values are ordered by »Standard values« and »special values« (depending on the type of device).
Read out of Measured Values via Smart View
•
In case Smart View is not running – please start it.
•
If the device data were not yet loaded – select »Receive Data From The Device« from menu »Device«.
•
Double click on icon »Operation« in the navigation tree.
•
Double click on icon »Measured Values« within the navigation tree »Operation«.
•
Double click the »Standard Values« or special values within the »Measured values«.
•
The measured and calculated values are shown now in tabular form on the window.
To have the measuring data read in a cyclic manner, select »Auto refresh«
in menu »View«. The measured values are read out about every two
seconds.
Current - Measured Values
Current
If the device is not equipped with an voltage measuring card the first measuring input on the first current
measuring card (slot with the lowest number) will be used as the reference angle (» IL1«).
Value Description Menu path
IL1 Measured value: Phase current
(fundamental) [Operation
/Measured values
/Current ]
IL2 Measured value: Phase current
(fundamental) [Operation
/Measured values
/Current ]
IL3 Measured value: Phase current
(fundamental) [Operation
/Measured values
/Current ]
EN MRM4 01/11 Page 133