Toshiba Strata AirLink DK40i, Installation And Maintenance Manual

Page: 485 / 724

Station Apparatus
Cordless Digital Telephones
Strata DK I&M 6/00
11-35
Station Apparatus
Telephone Cord Connection
There are two telephone line jacks on the back of the base unit of your cordless digital telephone:
“Line In” and “Line Out.” You can connect the cordless digital telephone to both the telephone line
and a Strata DK digital telephone.
➤
To connect cords for use as a stand-alone telephone
➤
Connect the modular jack labeled “Line In” to the telephone wall jack.
...or
➤
To connect cords for use with a desk telephone
1. Unplug the telephone line cord from your desk telephone.
2. Connect this cord to “Line In” of your cordless telephone.
3. Using the two foot modular cord that came with your cordless telephone, connect the jack
labeled “Line Out” to the desk telephone.
Connect and Apply Power to Base Unit
The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug
having one blade wider than the other). This plug fits into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit,
contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the
blades on the polarized plug.
➤
To connect the cordless telephone using the AC adapter
1. Plug the AC adapter cord into the AC adapter input jack on the base unit (see Figure 11-25 ).
CAUTION! Use only the AC adapter supplied with your cordless digital telephone.
Figure 11-25 Cordless Telephone AC Adapter
Line Out
to DKT
Modular
Cords
AC Adapter
1145
5232
Line in to Digital Telephone Circuit
(DK14 KSU; DK40i Base KSU or
KCDU, or DK40i, DK424, DK424i
PDKU2 or RDSU)
See Chapter 10 – Universal Slot
PCB Wiring